![]() ![]() Settings Certifications iBeacon Advertisement UUID | Major | Minor | Measured Power AltBeacon Advertisement Beacon ID | Reference RSSI Advertisement Rate: 1Hz - 10Hz Transmit Power: +4dBm to -20dBm Apple iBeacon iBeacon Licensed Product Bluetooth Bluetooth controller subsystem FCC FCC part 15 modular qualification CE EN300328, EN301489 IC Industry Canada Modular Qualification Hardware Form Factor: Polycarbonate NEMA 4x waterproof enclosure Electrical Interface: PCB mounted dual AA-battery clips Operating Temperature -40☌ to 60☌ (-40☏ to 140☏) Battery Life Advertising Rate High - 100ms Medium - 200ms Low - 1000ms Battery Life 9 Months 18 Months 92 Months Bluetooth Radios Version: 4.0 (Bluetooth Smart) Frequency: 2.402GHz to 2480GHz Transmit Power: +4dBm to -20dBm Typical Line-of-Sight Range: 5m to 50m Antenna: Ceramic chip monopol antenna © 2014 Radius Networks, inc. RadBeacon has been designed and certified by Radius Networks to conform to the AltBeacon proximity standard and is compatible with AltBeacon-enabled applications Below, you will find more information about your RadBeacon, including how to configure your beacon using the RadBeacon Configuration App available on the iTunes App Store. It’s the perfect beacon for any location regardless of power and can withstand the harshest operating conditions RadBeacon is an iBeacon™ Licensed Product that has been designed and certified by Radius Networks to meet Apple performance standards. The RadBeacon X2 proximity beacon is easy to deploy, easy to maintain, reliable and long-lasting. It can be flexibly installed in any location, regardless of available power and provides proximity advertisements for mobile applications that are compatible with iBeacon and AltBeacon microlocation technology. The RadBeacon X2 is a rugged, weatherproof, and temperature-resistant proximity beacon powered by 2 AA batteries. In order to re-enter normal operational model, simply remove and replace power to the device.RadBeacon X2 by Radius Networks The RadBeacon X2 is a fully standalone Bluetooth Smart™ proximity beacon using iBeacon™ and AltBeacon™ technology. Select the DFU button to reboot the beacon into Direct Firmware Update mode.Ĭontact Radius Networks support for information on the procedure for firmware update or replacement. In order to re-enter configurable mode for a RadBeacon X2, remove the front cover and switch the beacon power switch to OFF and back to ON.Ī beacon set in configurable mode will be configurable for up to 30 minutes or until you lock the device again. In order to re-enter configurable mode for a RadBeacon Tag, remove the front cover and press the configuration push button switch near the coin cell battery. In order to re-enter configurable mode for a RadBeacon USB, remove and restore power to the device. The Lock feature is a security precaution to limit the possibility of third party manipulation of your beacons once they have been installed and configured. Select the Lock button to submit a valid PIN to prevent connections from remote Bluetooth 4.0 devices to the beacon configuration service. Submit a valid PIN to reset the settings for your beacon to factory defaults. ![]() Select the Reset button to reset the device to the original factory settings. Select the Update PIN button to submit a new and existing PIN to update the PIN for your beacon. Advertised Organizational Identifier Ĭhange any of the modifiable settings and select the Apply button to submit a valid PIN to update the settings for this beacon. Select any RadBeacon in the table to view it's detailed settings. Each beacon discovered is displayed with the following summary details Scan for nearby configurable RadBeacons by pressing the Start Scanning button. Once discovered, you can display each beacon's operating settings and make modifications to those settings. With the RadBeacon app you can scan for nearby configurable Radius Networks beacons. The RadBeacon app from Radius Networks requires a Macintosh computer running OS X 10.9 or higher and equipped with Bluetooth 4.0 capabilities. ![]() The RadBeacon™ app is the configuration utility for RadBeacon proximity beacons from Radius Networks that support Apple's iBeacon™ proximity services as well as other emerging proximity services. ![]()
0 Comments
Leave a Reply. |